| |
|
| 1 |
 |
|
|
| Because
as thicker the material is used for manufacturing
a meat processing machine as longer is the life
time to be expected. |
|
| 2 |
 |
|
|
| At REICH we
design our bandsaws for a life time of 25 to 30
years. |
|
| 3 |
 |
|
|
To achieve
this goal Reich uses a 3 mm pure sheet of
stainless steel to make the housing of machine.
The most important part of a band saw is the
table. Therefore this part is made even out of 4
mm stainless steel for they models Combi 200 up
to Universal 300.
|
|
| |
|
| 4 |
 |
|
|
Since the
machines are nowadays cleaned by means of high
pressure cleaners Reich
decided to weld the housing completely. By using
this manufacturing method no gaskets
or seals are used and therefore cannot be
destroyed either.
|
|
| 5 |
 |
|
|
The other advantage is
that the housing once made will never change
itīs shape or become
loose and flimsy.. |
|
| 6 |
 |
|
|
On our larger models
for example Profi 400, Industry 500 and Mammut
800 it is even made of 5 mm
stainless steel sheets. |
|
| |
|
| 7 |
 |
|
|
This ensures a durable
hygienic perfect combination of housing and
table.
By additional bars under the table. therefore the
table is rigid enforced additionally.
In that way the plate of table is perfectly
prepared for the heaviest parts of meat and
carcasses. |
|
| 8 |
 |
|
|
| The head of machine is
firm and continous welded to the vertical bar of
machine. |
|
| 9 |
 |
|
|
| First class workmanship
is the guarantee for a long lifetime. As little
parts are used as less maintenance and repairs
are needed. Less parts means also less cleaning
efforts. |
|
| |
|
| 10 |
 |
|
|
| The biggest advantage
of the all welded housing is that the table plate
is complete and seamless welded to the machine's
body. |
|
| 11 |
 |
|
|
| The assembly parts are
of such a design that they do not create a gab -
where dirt and bacterias can be collected. |
|
| 12 |
 |
|
|
| Solid covers with a all
over rubber gasket ensure a waterproof design. |
|
| |
|
| 13 |
 |
|
|
By use of an special brass alloy durable and
rustfree guidances of saw blade are installed.
For easy maintenance and easy stock keeping the
upper and lower blade guidance are same.
It goes without saying that these parts are wear
parts and therefore can be exchanged without
usage of any tools. |
|
| 14 |
 |
|
|
| The lead through of the saw blade in the
table is covered by a plastic part. That ensures
that the teeth of saw blade will never touch the
metal. A guarantee for a long lifetime of the saw
blade. |
|
| 15 |
 |
|
|
The thickness of portion is equal over the
complete cut.
To make the portion work easier and more accurate
a rigid portion gauge comes with the machine. |
|
| |
|
| 16 |
 |
|
|
This can be set to any size of portion
between 0 and 250 mm.
A metric graduation on the surface of table helps
to adjust the portion gauge to the desired
position. |
|
| 17 |
 |
|
|
| For cutting of bones or small pieces like
cubes a special developed safety tool is added to
the machine. It is called material pusher. By use
of this unit which is hinged to the under side of
machine's head safely and fast small pieces of
bones can be cut. |
|
| 18 |
 |
|
|
The EC-regulations allow to make the material
pusher removable if the lateral height of cutting
exceeds 245 mm. Therefore all Reich bandsaws from
model Universal 300 up to Mammut 800are equipped
with this unit.The upper guidance is
infinitesimal adjustable in height in order to
allow a precise cutting
of large as well as small portions. |
|
| |
|
| 19 |
 |
|
|
Specially for bones it is a real safety
features since it avoids due to its toothed shape
the dangerous twisting of the bone
during sawing. |
|
| 20 |
 |
|
|
To achieve an clean and appetising surface of
the portions wheel -and blade scrapers are
installed.
The wheel and blade scrapers are of same design.
They can be changed easily by pulling them from
the rod. |
|
| 21 |
 |
|
|
For safety reasons all pulleys are with a
brim on either side of the track of saw blade.
Of course far enough apart from the sensitive
teeth of saw blade. |
|
| |
|
| 22 |
 |
|
|
A silent run of the machine is guaranteed by
the precise manufactured wheels and the strong
suspension of motor, drive wheel and upper
pulley.
|
|
| 23 |
 |
|
|
| The spherically turn of the wheels ensures a
precise track of the saw blade. This makes sure
that under no circumstances the saw blade will
leap from the wheels. |
|
| 24 |
 |
|
|
Well approved seals ensure that the gab
between housing and motor shaft and the drive
pulley are waterproof.
Even by use of a high pressure cleaner no harm is
done to the parts inside the machineīs housing. |
|
| |
|
| 25 |
 |
|
|
The brake of the blade is created by a wear
free electrical brake system.
It is basically a rectifier and a transformer.
This applies the motor with an direct current and
stops the blade within 4 seconds.
Due to this simple but effective electric brake
system no special trained service engineers are
required to maintain the electric control box. |
|
| 26 |
 |
|
|
It is rather like this that any educated
electrician is able
to repair the control panel in case a part is
malfunctioning.
By use of electrical standard components by well
known manufactures a world-wide availability
of these parts is guaranteed.
The electric control system is installed in a
waterproof separate housing. To avoid condense
formation
inside the control box it is slightly heated.
This prevents also a oxidation of the condactor
contacts and ensures a trouble free operation. |
|
| 27 |
 |
|
|
By use of rubber cabs on the "ON"
and "OFF"-push buttons the highest
classification in water proofness
is achieved. |
|
| |
|
| 28 |
 |
|
|
Opposite to many other brands the ball
bearings for the upper pulley are installed in
the wheel hub.
This design guarantees are uniform distribution
of the force onto the ball bearings and ensures
an
extrem long lifetime of the ball bearings. Of
course the installed bearings are in size big
enough
to enable an outstanding long lifetime, too. |
|
| 29 |
 |
|
|
| Opposite to
the high quality of all REICH- bandsaws are the
prices very competitive. Do not hesitate to
contact one of our representatives or us for
further details. Phone: +49-7151-79899 or fax:
+49-7151-74692) |
|
| 30 |
 |
|
|
| We do also tailor made designs. . |
|
